Off Timer Setting; To Set Monitor Power-Off Time [Off Timer]; Monitor Power-Saving Mode Setting; To Set The Resume Conditions From The Power-Saving Mode [Signal Detection] - Eizo FLEXSCAN HD2441W User Manual

3-7 Off Timer Setting

●

To set monitor power-off time [Off Timer]

This function allows the monitor to automatically turn off after a specifi ed time
has passed.
[Procedure]
(1) Choose the <Off Timer> icon in the Setting menu and tap the slide bar.
The <Off Timer> menu appears.
(2) Trace the slide bar left and right to set the monitor power-off time in 15
minutes increments (15 to 180 minutes) and tap the slide bar.
The setting is completed.
[Checking/Changing the remaining power-off time]
(1) Choose the <Off Timer> icon in the Setting menu and tap the slide bar.
The current remaining time is displayed.
(2) When changing the remaining power-off time, while the remaining time is
displayed, trace the slide bar left and right to change the remaining time.
Then tap the slide bar.

3-8 Monitor Power-saving Mode Setting

●
To set the resume conditions from the power-saving mode
[Signal Detection]
This function sets the power-saving mode condition when no input signal is
detected on the current selected input signal and the resume conditions from the
power-saving mode.
Settings No input signal
All Input
Signals
After 5 seconds have passed
with no input signal detected,
Current Input
the monitor enters the power-
Signal
saving mode.
Disable After 45 seconds with no input
signal status, the monitor
enters power off status.
[Procedure]
(1) Choose the <Monitor Settings> icon in the Setting menu and tap the slide
bar.
(2) Choose the <Signal Detection > icon in the <Monitor Settings> menu and
tap the slide bar.
The <Signal Detection > menu appears.
(3) Trace the slide bar left and right to select either "All Input Signals", "Current
Input Signal" or "Disable" and tap the slide bar.
The signal detection setting is completed.
Resume conditions from
power-saving mode
All input signals are watched
and if any signal is detected
in the no-signal status, the
monitor resumes to display
the projected image with the
detected input signal.
The signal selected when
entering the power-saving
mode is watched and if any
signal is detected in no signal
status, the monitor resumes
to display the projected image
with the current input signal
selected.
Attention
• "The power will turn off soon. To
cancel Off Timer, touch the slide bar."
appears on the screen one minutes
before the monitor turns off.
NOTE
• If it is set to "Disable", the off-timer
setting is released.
Attention
• The monitor watches the input signal
status. If the input signal is detected
before entering the power-saving
mode, the signal detection is not
recognized as a resume condition.
• When displayed in PinP, the monitor
does not shift to power-saving mode.
• If it is set to "All Input Signals", the
monitor may not resume from the
power-saving mode depending on
the connected external equipments or
some conditions. When the monitor
does not resume, change the setting or
touch the slide bar and then select the
input signal for the desired image sent
from the equipment.
Attention
• Unplugging the power cord
completely shuts off power supply to
the monitor.
• Even if the monitor enters the sleep
mode, all the devices connected
to the USB ports (upstream and
downstream) work.
(Therefore the monitor power
consumption varies with connected
devices even in the power-saving
mode.)
Chapter 3 Settings and Adjustment
29