Functions - Eizo FLEXSCAN HD2441W User Manual

1-3 Functions

Switching the Input Signal
Single display
Input Selection menu (As for the menu operation, refer to page 13.)
●
To switch the input signal for the desired display
sent from the equipment [Input Selection] ... see page 15
Setting/Adjusting the Monitor
(Only for analog input signal from PC: PC 2 Input)
1
Screen Adjustment
●
Adjusting the screen automatically
[Auto Screen Adjust]
2
Advanced Screen Adjustment
●
To eliminate vertical bars
[Clock] .................................... see page 17
●
To remove flickering or blurring
[Phase] .................................... see page 17
●
To correct screen position
[Hor.Position] ........................... see page 18
[Ver.Position] .............................. see page 18
●
To set when the image is not displayed with
proper resolution [Resolution] ......... see page 33
●
To adjust color gradation automatically
[Auto Range Adjust] .................. see page 18
●
To set when noise appears on the screen
[Signal Filter] ........................... see page 33
Color Adjustment
(Simple Adjustment)
●
To select the color mode [Color Mode]
Color Adjustment
(Advanced Adjustment)
●
[Brightness / Black Lebel / Contrast / Saturation
/ Hue / Temperature / OutlineEnhancer /
ContrastEnhancer / Gain / Gamma / Noise Filter
/ I/P Conversion] can be set for each mode.
Settable functions vary with the display mode.
Resumption of Default Settings
●
To reset the color adjustment
[Reset] .................................... see page 14
10
Chapter 1 Features and Overview
Page 16
Screen menu
Page 19
Color menu
Page 20
PinP (Picture in Picture) display
●
To switch the input signal for the Main Window/
Sub-Window .............................. see page 25
●
To hide the Sub-Window display with its sound
being heard [Sub-Window Off] ...... see page 25
Setting menu
(As for the menu operation, refer to page 13.)
PinP (Picture in Picture) Display
●
To display the PC input signal screen
(Main Window) and Video input signal screen
(Sub-Window) on the monitor simultaneously
[PinP] ....................................... see page 24
●
To change the Sub-Window position
[Sub-Window Position] ............... see page 26
●
To set the translucent level for Sub-Window
[Translucent] .............................. see page 26
●
To select the Sub-Window display size
[Sub-Window Size] ..................... see page 26
Sound Adjustment
●
To adjust [Volume / Treble / Bass / Balance /
Sound Level]
●
[ ] stands for the function name.
●
Settable functions differ depending on the input
signal.
Page 24
PinP Settings menu
Page 23
Sound menu