Setting Monitor's Automatic Brightness Adjustment [Auto Ecoview]; Setting The Automatic Power Off Function [Eco Timer]; Setting Monitor's Automatic Brightness Adjustment; Setting The Automatic Power Off Function - Eizo FlexScan SX2462W User Manual

4-3. Setting Monitor's Automatic Brightness Adjustment

[Auto EcoView]
The sensor on the lower side of the monitor detects the environmental brightness to adjust the screen
brightness automatically and comfortably by using the Auto EcoView function.
Attention
• Be careful not to block the sensor on the lower side of the monitor when using the Auto EcoView function.
Procedure
1. Choose <PowerManager> from the Adjustment menu, and press
2. Choose <Auto EcoView> from the <PowerManager> menu, and press
3. Select "On" or "Off" with
4. Press

4-4. Setting the automatic power off function [Eco Timer]

This function allows you to switch the setting to turn off the monitor automatically after a specified time
has passed at the power saving mode.
Adjustable range: Disable, Enable (0, 1, 2, 3, 4, 5, 10, 15, 20, 25, 30, 45 min, 1-5h)
Procedure
1. Choose <PowerManager> from the Adjustment menu, and press
2. Choose <Eco Timer> from the <PowerManager> menu, and press
3. Select "Off" or time to turn off the monitor with
4. Press
30
Chapter 4 Power Saving Function
or
to exit the adjustment.
to exit the adjustment.
.
or .
.
.
.
.