Listening to Radio
You can listen to the chosen band (FM, MW, (LW),(SW1,2) broadcast stations)
by using either the automatic or manual tuning operation.
Remote Control Unit
1
Press TUNER/
BAND button.
•
The selection toggles back
and forth between "FM
(LW) (SW1,2)" each time
the TUNER(BAND) button is
pressed.
Main Unit
Press the Function
1
button to select the
desired band (FM,
MW,(LW),(SW1,2)).
43
2
Tune in to the
desired station.
Press
Automatic Tuning 1
button to select the preset station.
MW
Press and hold
Automatic Tuning 2
to automatically search the band.
Manual Tuning
Briefly press
increase or decrease the frequency incrementally.
2
Select a broadcast
station.
Press the STOP ( ) button
Automatic Tuning 1
to select PRESET and then
press
button or turn Multi Jog
Knob to select the preset station.
Press the STOP ( ) button to
Automatic Tuning 2
select "AUTO" and then press
button or turn Multi-Jog Knob to
automatically search the band.
Press STOP ( ) to select
Manual Tuning
MANUAL and then briefly
press
or turn Multi Jog Knob
to tune in to a lower or higher frequency.
Press MONO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
DISC SKIP
REPEAT
button or
TUNER
BAND
button
VOLUME
SOUND
MODE
button to
TIMER/CLOCK
TIMER ON/OFF
AH59-01379B
SLEEP
DIMMER
ZOOM
SLOW
MONO/ST
REMAIN
SUB TITLE
DECK 1/2
TAPE
AUX
TUNING
TUNER
MEMORY
AUDIO
STEP
CANCEL
DIGEST
LOGO SLIDE MODE
NTSC/PAL