Timer Function - Samsung MAX-DS960 Instruction Manual

Timer Function

•
The timer enables you to switch the system on or off at specific times.
•
If you no longer want the system to be switched on or off automatically, you must cancel the timer.
•
Before setting the timer, check that the current time is correct.
•
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
Example: You wish to wake up to music every morning.
1
Switch the system
on by pressing
STANDBY/ON.
4
Set the timer
switch-on time.
a. Set the hour by pressing
button.
b. Press ENTER .
•
The minutes flash.
c. Set the minutes by pressing
button.
d. Press ENTER.
• OFF TIME is displayed (instead
of the equalizer symbols) for a few
seconds, followed by any switch-
off time already set; you can now
set the timer switch-off time.
Press or button
7
to select the source to
be played when the
system switches on.
•
TAPE (cassette) : Insert a cassette
tape.
•
TUNER (radio) : a Press ENTER.
b Select a preset
station by pressing
or
•
CD (compact disc) : Load a compact
disc.
Note
51
Press
2
TIMER/CLOCK
until TIMER is
displayed.
5
Set the timer
switch-off time.
or a. Set the hour by pressing
button.
b. Press ENTER.
•
The minutes flash.
or c. Set the minutes by pressing
button.
d. Press ENTER.
• VOL 10 is displayed, where 10
corresponds to the volume
already set.
Press ENTER to
8
confirm the timer.
.
•
If the timer switch on and off times are identical, the word ERROR is displayed.
•
You can also use RETURN button on the front panel to instead ENTER button on the remote control in step
3,4,5,6,7,8.
•
You can also use Multi Jog or
Press the ENTER
3
button.
• ON TIME is displayed (instead
of the equalizer symbols) for a
few seconds, followed by any
switch-on time already set; you
can set the timer switch-on time.
Press
6
to adjust the volume
level and press
ENTER.
•
or The source to be selected is
displayed.
or
Press
9
STANDBY/ON to
set the system to
standby mode.
•
is displayed to the top right of
the time, indicating that the timer
has been set.
•
The system will switch on and off
automatically at the required
times.
button to instead , button on the remote control in step 4,5,6,7.
or button