Listening To Radio; Presetting Stations - Samsung MAX-DVD9910 Instruction Manual

Listening to Radio

You can listen to the chosen band (FM, MW, SW1,2) broadcast stations) by using
either the automatic or manual tuning operation.
Remote Control Unit
2
1
Press TUNER/ Tune in to the
BAND button. desired station.
Automatic Tuning 1
•
The selection toggles back
to select the preset station.
and forth between "FM MW
SW1,2" each time the
Automatic Tuning 2
TUNER(BAND) button is
pressed.
automatically search the band.
Manual Tuning
increase or decrease the frequency
incrementally.
Main Unit
Press the Function
1 2
Select a broadcast
button to select the
station.
desired band (FM,
MW,SW1,2.
Automatic Tuning 1
and then press
MULTI-JOG to select the preset station.
Automatic Tuning 2
press
knob to automatically search the band.
Manual Tuning
press
tune in to a lower or higher frequency.
Press MO/ST button to listen in Mono/Stereo.
(This applies only when listening to an FM station.)
•
Each time the button is pressed, the sound switches between "STEREO" and "MONO".
43
•
In a poor reception area, select MONO for a clear, interference-free broadcast.
SLEEP DIMMER
DISC SKIP ZOOM SLOW
MONO/ST
REPEAT REMAIN SUB TITLE
DECK 1/2
Select PRESET and then press
TUNER TAPE AUX
button or
BAND
Select "AUTO" and then press
VOLUME TUNING
and hold button to
SOUND TUNER
MODE MEMORY
Select "MANUAL" and then
P.SCAN
briefly press to
AUDIO
STEP
Press the STOP ( )
TIMER/CLOCK CANCEL DIGEST
button to select PRESET
TIMER ON/OFF LOGO SLIDE MODE
button or turn
NTSC/PAL
Press the STOP ( ) button
to select "AUTO" and then
button or turn Multi-Jog
Press STOP ( ) to select
MANUAL and then briefly
or turn MULTI-JOG to

Presetting Stations

You can store up to:
15 FM stations
5 MW stations
5 SW1 stations
5 SW2 stations
Example: Presetting FM 89.1 in the memory
Press the
1 2
TUNER(BAND)
Press
button and select
select "89.10".
the FM band.
• •
Each time the button is pressed, Refer to Step 2 on page 43 to
the band switches between automatically or manually tune in
"FM MW SW1,2". to a station.
MHz
4 Press to 5
Press the TUNER
select preset
MEMORY button.
number.
• •
You can select between 1 and Press the TUNER MEMORY button before
'PROG' disappears from the display.
15.
•
'PROG' disappears from the display and
the station is stored in memory.
To tune in to a preset station, press
remote control to select a channel.
3
Press the TUNER
to
MEMORY button.
•
"PROG" flashes in the
display.
To preset another
6
station, repeat
steps 2 to 5.
on the
44