Table of Contents
Advertisement
00115A DVD-V77MS-GB1
10/25/02 10:43 AM
Connecting Other Equipment to Your DVD-VCR
GB
You can connect other audio and/or video equipment to your DVD-VCR in different ways. The following
illustrations give a few examples of the connection possibilities.
The RCA input/output connectors on the rear of the DVD-VCR are used for equipment,
such as camcorders, VCRs or sound systems.
REAR OF THE DVD-VCR
12
Page 12
Camcorder
VCR
Sound system
Plug & Auto Set Up
Your DVD-VCR will automatically set itself up when it is plugged
into the mains for the first time. TV stations will be stored in
memory. The process takes a few minutes. Your DVD-VCR will
then be ready for use.
1
Connect the coaxial cable as indicated on page 11.
(Connecting Your DVD-VCR to the TV Using the Coaxial Cable)
2
Plug the DVD-VCR into the mains.
Result:
The select menu language menu is displayed.
3
Select the required language by pressing the number buttons.
Result:
A message appears.
4
Press ENTER to start the auto scanning.
The number of stations automatically stored by the DVD-VCR
depends on the number of stations that it has found.
5
On completion, press RETURN twice to exit the menu.
Auto preset can be performed by pressing (STOP) on the
DVD-VCR continuously for 5 seconds or more with no tape
inserted.
GB
TV
DVD & VCR
2
AUTO SET UP
PLEASE WAIT
60%
I
-------I
RETURN
CLOCK SET
12:00
1/JAN/2002
TUE
➛!❿!!!
RETURN
$ ❷
13
Advertisement
Table of Contents
