Printing Pictures Using Pictbridge - Samsung Reclaim User Manual

Printing Pictures Using PictBridge

Your phone is PictBridge compatible, allowing you to
print directly from your phone without connecting to a
computer. Simply connect your phone to a PictBridge-
enabled printer and print your photos.
Note Make sure your battery is fully charged before using
PictBridge.
To print pictures directly from your phone:
1.
Highlight and press
2. Read the onscreen message and press
softkey).
3.
Connect your phone to the PictBridge-enabled
printer by using a USB cable. (Wait until the
connection is completed.)
4.
Read the
Connect Printer
(left softkey). The
NEXT
in the display. Select the folder location of the
image.
> Photos > PictBridge
(left
NEXT
message and press
pop-up appears
Select Folder
5.
Highlight the desired image and press
softkey). (To select multiple images, press
place a check mark next to each image selected.)
6. Set the printer settings using your navigation key.
to set the number of copies to print.
Copies:
Type: to select a print type option:
Borderless
●
border. Other printer may also display:
, and
2-Up
Index prints the index information.
●
.
Note These options may vary and are dependent on the
printer's capabilities.
Paper Size : You can set the print size from
. (Print sizes may vary according to the type of
4x6
printer you have.)
Note These sizes may vary and are dependent on the
printer's capabilities.
You can imprint the date on your
Date Print:
pictures. Select
be available depending on the type of printer you
have.)
prints the standard image without a
.
4-Up
or . (Date stamping may not
On Off
2I. Camera
(left
PRINT
to
,
1-Up
Default or
119