Printing Pictures Using Pictbridge - Samsung SPH-A920 Phone Manual

Printing Pictures Using PictBridge

PictBridge is an industry standard established by the Camera & Imaging
Products Association (CIPA) that enables a range of digital photo solutions,
including direct photo printing from a digital camera to a printer without the
need for a PC.
Printing From Your Phone
The a920 comes equipped with a built-in camera that allows you to print
images directly to a printer using the PictBridge technology. A USB cable
must be connected between the two devices before any printing can occur.
To use PictBridge to print pictures from your phone:
1.
Insert one end of the accessory cable into the USB slot on the
printer. (Printer must support PictBridge technology.)
2.
Select Menu > Pictures > PictBridge Print.
3.
Insert the USB cable into your phone.
4.
Read the Connect Printer message and select OK (
5.
Highlight the desired image and select Next (
multiple images, press
image selected.)
6.
Highlight Copies and press the navigation key left or right to select
the desired number of copies to print.
7.
Press the navigation key down to select Type. Press the navigation
key left or right to select one of the following:
Standard: prints the standard image.
Index: prints the index information.
Note: These options may vary and are dependent on the printer's capabilities.
Section 2J: Using the Built-in Camera and Camcorder
to place a check mark next to each
).
). (To select
143