Roland RS-70 Owner's Manual page 143

fig.Win-12.e
18.
The Found New Hardware wizard will
appear.
Make sure that the display indicates
"Roland RS-70," and click [Finish].
Wait until "Found New Hardware"
appears near the taskbar.
19.
When driver installation has been
completed, the System Setting Change
dialog box will appear. Click [Yes].
Windows will restart automatically.
If you changed "What action do you want Windows to take?"
If you changed the "What action do you want Windows to take?" setting in step
4, restore the original setting after Windows restarts.
1. If you are using Windows XP Professional, log on to Windows using the user
name of an administrative account (e.g., Administrator).
2. Click the Windows start menu, and from the menu, select Control Panel.
3. In "Pick a category," click "Performance and Maintenance."
4. In "or pick a Control Panel icon," click the System icon. The System
Properties dialog box will appear.
5. Click the Hardware tab, and then click [Driver Signing]. The Driver Signing
Options dialog box will appear.
6. Return the "What action do you want Windows to take?" setting to the
original setting (either "Warn" or "Block"), and click [OK].
7. Click [OK]. The System properties dialog box will close.
Next, you need to make the driver settings.
Performing with a computer
→ Settings and checking (p. 148)
Depending on how your
system is set up, the
System icon may be
displayed directly in the
Control Panel (the Classic
display). In this case,
double-click the System
icon.
143