Checking The Saved User Settings - Pentax K-5 Operating Manual

3
Enter the text.
Up to 18 single-byte
alphanumeric
characters and
symbols can be
entered.
Available operations
Four-way controller
(2345)
Rear e-dial (S)
| button
4 button
i button
4
After entering the text, move the text selection cursor to
[Finish] and press the 4 button.
The name is changed.
Repeat Steps 2 to 4 to change the names of other A modes.
5
Press the 3 button.

Checking the Saved USER Settings

1
Select [Check Saved Settings] in Step 3 of "Saving the
Settings" (p.227) and press the four-way controller (5).
The [Check Saved Settings] screen appears.
2
Use the four-way controller (23) to select [A1] to
[A5] and press the four-way controller (5).
The current settings saved in the selected
Text selection
cursor
Text input cursor
Moves the text selection cursor.
Moves the text input cursor.
Switches between upper and lower case letters.
Enters a character selected with the text selection
cursor at the position of the text input cursor.
Deletes a character at the position of the text
input cursor.
A mode are displayed.
Rename USER Mode
USER1
Finish
USER1
Delete One Character
MENU Cancel
229
OK Enter
6