Setting The Operation Of The Power Lamp - Pentax K-x Operating Manual

254
2
Use the four-way controller (23)
to select the type of batteries.
When set to [Auto-detect], the camera will
automatically detect the type of batteries
being used.
3
Press the 4 button.
4
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
When a type of batteries different from that selected in the menu setting is
used, the battery level will not be correctly determined. Please set the correct
battery type. Usually, there is no problem using [Auto-detect]. However in low
temperatures and when using batteries that were stored for long periods of
time, set the appropriate battery type so the camera can correctly determine
the remaining battery level.

Setting the Operation of the Power Lamp

Sets the operation of the power lamp from [Standard] (default setting),
[Low] or [Off].
Set in [20. Power lamp] of the [A Custom
9
Setting 3] menu (p.81).
Even if the power lamp is set to [Off], the lamp lights up while the camera is
transferring data to a computer when connected using the USB cable.
1 2 3 4
Auto Power Off
Select Battery
AUTO Auto-detect
Lithium
Li
Nickel-Metal Hydride
Ni-MH
Alkaline
AL
MENU Cancel
20. Power lamp
1 Standard
Low
2
3 Off
The power lamp is lit
when the camera is
switched on
MENU Cancel
1min.
AUTO
AUTO
OK OK
OK OK