Operation Chart; Quick Operation Chart - Panasonic WORKIO DP-3520 Operating Instructions Manual

Getting To Know Your Machine

Operation Chart

■ Quick Operation Chart

Original
Turn the
Power
Load Paper
Switch On
(Left side of
the Copier)
● Adding Paper (550-Sheet Paper Tray 2-4)
1
4
● Adding Paper (Sheet Bypass)
Copying on Special Paper, etc.
1
Sheet Bypass
4
Side Guides
10
1
Turn the Main
From
Power Switch On
ADF
(Back side of the
Copier)
(See page 8)
or
Original Guides
Adjust to the original's width
From
Platen
INV
INV
LTR
LGL
LTR
LDR
2
Paper Weight: 16-24 lb
NOTE:
When changing the paper size, refer to page 70.
Paper Tray 3 and 4 (Option)
1550-Sheet Paper Tray (See page 12)
3000 Sheet Large Capacity Paper Tray (Option) (See Page 12)
2
Until it Stops
Adjust the side guides.
Incorrect adjustment may cause the
paper to wrinkle, misfeed or skew.
NOTE:
If the paper size is not detected,
remove paper and press Reset Key.
Then, load the paper again.
Face Up
Tray
Max. 70 originals
Original Guides
Face Down
INV
LDR ● If the original is not positioned
INV LTR LGL
properly, a portion of the original
may not be copied.
● For originals smaller than Invoice
size, position the original within
the Invoice area and select
Invoice.
3
Max Level Indicator
Paper Capacity: 550 Sheets (20 lb)
3
Face Down
Load Paper
(Do not exceed limit mark)
Approximately up to 50
Letter size sheets/20 lb
Paper Weight: 15-35 lb
To add paper to the Sheet Bypass,
remove the paper left on the tray, and
align it with the added paper and load
them together onto the tray.
2
COPY
If set in other
function mode
4
4