Operation Chart Common Features And Usage - Panasonic FP-D355 Operating Instructions Manual

Operation Chart
Common features and usage
Basic Operation
FP-D455
FP-D605
FP-D355
FP-D355DC
Turn the Power
Switch on
(FP-D355/D355DC)
Turn Operation
Switch On
(FP-D455/D605)
Position of the original
Memory capacity:
When the memory becomes full during the original scanning, the message of "Function not
available for lack of memory" will be displayed in the message display. In this case, follow the
operating instruction in the message display.
When the additional memory is required, consult with authorised dealer.
Note on making multiple copies (For FP-D455/D605)
If the fusing temperature drops excessively during a multi-copy cycle, there is a possibility that
the copying speed will be reduced. The copying speed will automatically return to normal when
the fusing temperature rises enough to ensure good fusing performance.
NOTE
4
Place paper
1
Position original
A3
A4
B4
A4R
A5
A5
A4R
B4
A3
A4
∗
While the copier is warming up, you may position your original on the copier, enter
your copy job selections and press the Print key. The wait indicator will flash until the
warm up cycle is completed and the copy job automatically start.
C When making 100 copies continuously or intermittently within 20 minutes, the fan
motor will start rotation. This is not irregular operation but just to cool off the machine.
C For FP-D455/D605, at following condition Touch Panel Display may light but it will turn
off within 40 seconds.
1. After turning off the Power switch.
2. After connecting the power code to the plug.
MULTI-SIZE
SORT/ USER
FEED FINISH PRESET
A3
FLS•B4
A4
A4
A5
2
Copy size Number of copies
(reduction/ (Up to 999)
enlargement only)
C Place face down on platen and in ADF (FA-A355).
Face Up in i-ADF (FA-A888).
C If the original is incorrectly placed on the platen glass,
part of the copy image may be missing.
C For originals smaller than A5 size, align with center of
left original guide and select A5.
Original Guide See [
ENERGY MANUAL INTERRUPT RESET
SAVER
1 2 3
4 5 6
7 8 9
0
3
4
*
Press Start
]