Panasonic WORKIO DP-3520 Operating Instructions Manual page 68

Function
For Key Operator
■ Copier Settings
Screen
No.
16 Memory Overflow Warning
17 Toner Save Mode (T)
04/05
18 Toner Save Mode (T/P)
19 Toner Save Mode (P)
20 Add New Tandem Desti.
21 Edit Tandem Destination
05/05
22 Delete Tandem Desti.
23 Copier Settings Print
● The Key Operator ID Code is required before any changes can be made to items on this page.
NOTE
∗
68
Modes
Selects the task to perform when memory
overflow occurs
● Print, Cancel
Selects the toner save in Text mode.
● None, Level 1, Level 2 ∗
Selects the toner save in Photo/Text mode.
● None, Level 1, Level 2 ∗
Selects the toner save in Photo mode.
● None, Level 1, Level 2 ∗
Inputs a new destination to split the copy job
Edits the split copy job destination
Deletes the split copy job destination
Prints the copier settings
● Stop, Start
"Level 1 or 2" setting consumes less Toner than "None" setting, however, the copy quality will
diminish slightly.
Toner saving is based on the Panasonic 6 % density Test Chart (N910653):
Level 1: Uses approximately 10 % less Toner than None setting.
Level 2: Uses approximately 20 % less Toner than None setting.
Function
Initial
Setting
Print
None
None
None