Getting Started; Making The Connections - Panasonic SC-AK240 Operating Instructions Manual

Getting started

Step 1 Step 1

- Making the connections

- Making the connections
Connect the AC power supply cord only after all other connections have been made.
1
Connect the speaker cords.
AK340
Gray
Red
Blue Black
(R)
4
Connect the AC power supply cord.
For your reference
To save power when the unit is not to be used for a long
time, unplug it from the household AC outlet. You will need
to reset some memory items after plugging in the unit.
Optional antenna connections Optional antenna connections
Use outdoor antenna if radio reception is poor.
Note:
Disconnect the outdoor antenna when the unit is not in use. Do not use the outdoor antenna during a lightning storm.
FM outdoor antenna
Rear panel
of this unit
• Disconnect the FM indoor antenna.
4
• The antenna should be installed by a competent
technician.
RQT8043
AK240
Connect
the left (L)
side in the
same way
Red
Red (+)
Gray (+)
Black (–)
Blue (–)
Black
FM outdoor antenna
(not included)
75 Ω coaxial cable
(not included)
30 mm (1
Shield braid
15 mm ( 19 / ˝)
32
Core wire
2
Connect the AM loop antenna.
Connect
the left (L)
Stand the antenna
side in the
up on its base.
same way
Red (+)
Black (–)
3
Tape the antenna where reception is best.
(L)
Note:
The included AC power supply cord is for use with this unit only.
Do not use it with other equipment.
AM outdoor antenna
3 / ˝)
16
Rear panel
of this unit
• Run a piece of vinyl wire horizontally across a window or
other convenient location.
• Leave the loop antenna connected.
Connect the FM indoor antenna.
Adhesive
AM outdoor antenna (not included)
5-12 m
(16 - 40 ft.)
AM loop antenna
(included)
tape