Setting The Wireless Lan Access Point - Panasonic Toughbook CF-U1GQG6L2M Reference Manual

Wireless LAN
Click or
A
Click [Change adapter settings].
B
Right-click [Wireless Network Connection] and click [Enable].
C
• A standard user needs to enter an administrator password.
• When [Disable] is displayed, [Wireless Network Connection] is already enabled.
Turn on wireless LAN in the Wireless Switch Utility.
D
NOTE
You can use the following procedure instead of turning on wireless LAN in the Wireless Switch Utility.
Click (Start) - [Control Panel] - [Adjust commonly used mobility settings].
A
Click [Turn wireless on] in [Wireless Network].
B
• When [Turn wireless off] is displayed, the wireless network is already on.
• If you cannot select [Turn wireless on], the wireless switch is turned off.

Setting the wireless LAN access point

Preparation
Follow the instruction manual of the wireless LAN access point to make settings for the access point to recognize the computer.
1
Turn the wireless LAN on.
2
Click or
3
Select an access point, and click [Connect].
4
Input the key you set for the access point to recognize the computer, and click [OK].
Wait for the computer to connect to the wireless LAN access point.
When the icon on the notification area is changed to
5
Click [Close].
NOTE
The settings depend on the network environment. For further information, ask the system administrator or the person
in charge of the network.
If you use the stealth type wireless LAN access point which restricts automatic detection of the wireless LAN access
point, take the following procedure.
If you do not perform the procedure below, you may not be able to access the wireless LAN access point automatically
or the wireless LAN access point may not be displayed on the [Connect to a network] screen.
Click , or
A
network] - [Manually connect to a wireless network] and click [Next].
Input necessary information and add check marks for [Start this connection automatically] and [Connect even if the
B
network is not broadcasting] and click [Next].
on the notification area and click [Open Network and Sharing Center].
on the notification area.
on the notification area, click [Open Network and Sharing Center] - [Set up a new connection or
, the wireless LAN setting is complete.
83