Preparation; Connections - Panasonic KX-MB271 Operating Instructions Manual

2For assistance, please visit http://www.panasonic.com/help Connections and Setup

2 Preparation

2.1 Connections

Caution:
L When you operate this product, the power outlet
should be near the product and easily
accessible.
1 Power cord
L Connect to a power outlet
(120 V, 60 Hz).
2 Telephone line cord
L Connect to a single telephone line jack (RJ11).
3 [EXT] jack *1
L You can connect an answering machine or an
extension telephone. Remove the stopper if
attached.
4 Answering machine (not included)
5 Handset unit (optional) connection jack
L You can connect the optional handset unit (page
62). Remove the seal if attached.
6 Network router/Network hub (not included)
L Also connect networked computers.
7 To the internet *1
8 LAN cable (not included)
L To assure continued emission limit compliance,
use only shielded LAN cable (category 5 straight
cable).
*1 KX-MB781 only
1
* The pictured model is KX-MB781.
Important notice for the USB connection
L Do NOT connect the USB cable until prompted by
the Multi-Function Station (page 22).
*1
*1
*1
*1
*1
5
3
9
2
8
6
9
For assistance, please visit http://www.panasonic.com/help
Note:
L If any other device is connected to the same
telephone line, this unit may disturb the network
condition of the device (KX-MB781 only).
Using surge protectors
L The warranty does not cover damage due to power
line surges or lightning. For additional protection, we
recommend using surge protectors (9).
If the unit shares a single telephone line with a DSL
service (KX-MB781 only)
Fax transmission/reception may be disturbed, noise
interference may be heard during telephone
conversations, or Caller ID (page 45) may not function
properly. A filter to prevent this is provided by your
provider. Please attach the filter (j) to the telephone
line cord of the unit.
* The pictured model is KX-MB781.
4
7
2. Preparation
j
15