Panasonic Lumix DMC-LX2 Operating Instructions Manual page 42

[ ]: The LCD monitor
becomes brighter and
POWER LCD
easier to see even when
taking pictures outdoors.
[ ]: The LCD monitor is easier
to see when taking
HIGH ANGLE
pictures with the camera
held high above your
head. This is useful when
you cannot get close to
the subject because there
is a person in the way.
(However it becomes
more difficult to see when
looked at straight on.)
The LCD monitor returns
[OFF]
to the normal brightness.
3
Press [MENU/SET].
• The [POWER LCD] or [HIGH ANGLE]
icon appears.
1
B:
C:
: POWER LCD
B
: HIGH ANGLE
C
• You can also use the joystick to perform
steps 2 and 3.
To select
42
VQT0Y44
Advanced
n Canceling High angle mode or Power
• If you press and hold [DISPLAY/LCD
• High angle mode is also canceled if you
• The brightness of the pictures displayed
• The LCD monitor automatically returns to
• You may not notice the High angle mode
19
• High angle mode is not activated in the
To set
LCD mode
MODE] again for 1 second the screen
shown in step 2 is displayed. Select [OFF]
to cancel Power LCD mode or High angle
mode.
turn the camera off or power save mode is
activated.
on the LCD monitor is adjusted when
Power LCD mode or High angle mode is
activated. Therefore, some subjects may
look different on the LCD monitor.
However, this does not affect the recorded
pictures.
normal brightness after 30 seconds when
recording in Power LCD mode. Press any
button to make the LCD monitor bright
again.
effect if the LCD monitor is difficult to see
because of light from the sun etc. shining
on it. In this case, we recommend using
your hand or another object to block the
light when using the camera.
following cases.
–In playback mode
–While the menu screen is displayed
–While the review screen is displayed