Panasonic Lumix DMC-LX2 Operating Instructions Manual page 125

Conditions
Folder or file number
appears as [–] and the
display goes black.
The picture is displayed
with a date different from
the actual recording date
in calendar playback.
n Connecting to a TV, computer or printer
Conditions
The picture does not
appear on the television.
The TV screen is
disturbed or displayed in
monochrome.
The display areas on the
TV screen and the
camera's LCD monitor
are different.
Cannot play motion
pictures on a television.
Cannot upload pictures
to your computer.
Others
The picture may have been changed on a computer or taken
on a different manufacturer's camera.
This problem can also occur if you remove the battery immediately
after taking a picture or if the battery had very little charge left.
• You will need to reformat the card to delete this type of
picture. (P106) (Remember that all data will be irretrievably
erased when you format the card, so save your data and
check the card before proceeding.)
• Pictures edited or rotated with a PC may be displayed in
black in playback mode (P36), multi playback (P77) and
calendar playback (P78).
Was the picture edited with a PC or recorded with a digital
camera from another manufacturer?
This kind of picture may be displayed with a date different
from the actual recording date in calendar playback. (P78)
Is the clock in the camera set properly? (P20)
For example, if the clock setting on the camera is different from
the date and time set on the PC and you acquire pictures
recorded with the camera to the PC and then write them back to
the card, the pictures may be displayed with dates different from
the actual recording dates in calendar playback etc.
Is the camera connected to the TV correctly?
Check it.
Set the TV to video input mode.
Depending on the TV model, the area display may be smaller
so the picture may be stretched horizontally or vertically and
the top and bottom or left and right of the picture may be cut
off when it is displayed. This is due to the TV specifications
and is not a malfunction.
You cannot play motion pictures if you have inserted the card
into a card slot on a television.
Connect the camera to the television with the included AV
cable and play the pictures on this unit. (P114)
Check the connections.
Check that the computer has correctly recognized the camera.
Set the camera's mode dial to a mode other than Print mode
(P107).
Causes
Causes
125
VQT0Y44