Panasonic Lumix DMC-FZ8 Operating Instructions Manual page 23

[POWER SAVE]
(Turning off this unit automatically.)
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P21)
Power save mode is activated (the camera
is automatically turned off to save the
battery life) if the camera has not been
used for the time selected on the setting.
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.], [OFF]:
• Press the shutter button halfway or turn
the camera off and on to cancel power
save mode.
• In simple mode [
fixed to [5MIN.].
• Power save mode is not activated in the
following cases.
– When using the AC adaptor
(DMW-AC7PP; optional)
– When connecting to a PC or a printer
– When recording or playing back motion
pictures
– During a slide show (P97)
[WORLD TIME] (P74)
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P21)
Set the time in your home area and travel
destination.
[ ]: Home area.
[ ]: Travel destination area.
[MONITOR/VIEWFINDER]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P21)
You can adjust the brightness of the
monitor or the Viewfinder in 7 steps.
[GUIDE LINE]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P21)
Set the pattern of the guide lines displayed
when taking pictures.
You can also set whether or not to have the
recording information and histogram
displayed when the guide lines are
displayed. (P38, 40)
[REC. INFO.]: [ON]/[OFF]
[HISTOGRAM]:[ON]/[OFF]
[PATTERN]: [
], power save mode is
]/[ ]
[TRAVEL DATE] (P72)
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P21)
Set the departure date and the return date
of the vacation.
[SET], [OFF]
[PLAY ON LCD] (P40)
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P21)
If you selected the Viewfinder in a
recording mode, the display will
automatically switch to the LCD monitor
when reviewing or playing back the
pictures.
[ON], [OFF]
[ZOOM RESUME]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P21)
The zoom position is stored when this unit
is turned off. When this unit is turned on
again, the zoom automatically returns to
the position it was at when this unit was
turned off. (P32)
[ON], [OFF]
• The zoom resume cannot be set in the
following cases.
– In simple mode [
– When [CONVERSION] on the [REC]
mode menu is set to [
Preparation
].
] or [ ].
23
VQT1B25