[Clock Set]; Set The Date, Time And Display - Panasonic Lumix DMC-FZ8 Operating Instructions Manual

Advanced (Recording pictures)
∫ Recordable range when using a
conversion lens
When attaching the tele conversion lens
Wide
—
Normal
—
Macro
When attaching the wide conversion lens
Wide
15 cm
Normal
(0.5 feet) to ¶
15 cm
Macro
(0.5 feet) to ¶
When attaching the close-up lens
Wide
20 cm
(0.7 feet) to
Normal
50 cm
(1.7 feet)
5 cm
(0.17 feet) to
Macro
50 cm
(1.7 feet)
Tele
—
Macro
• The zoom is fixed to Tele when using the
tele conversion lens and is fixed to Wide
when using the wide conversion lens.
Indication
Tele
conver-
12k
sion
lens
Wide
conver-
1k
sion
lens
90
VQT1B25
Tele
5.4 m (18 feet)
to ¶
5.4 m (18 feet)
to ¶
Tele
—
—
Tele
40 cm
(1.3 feet) to
50 cm
(1.7 feet)
40 cm
(1.3 feet) to
50 cm
(1.7 feet)
33 cm
(1.1 feet) to
50 cm
(1.7 feet)
Actual
magnification
¢
20.4k
0.7k
¢ The actual magnification when using the
digital zoom (P34) and the extended
optical zoom (P33) is 1.7k the zoom
magnification displayed when set to Tele.
• The full range of the zoom can be used
when using the close-up lens.
• Digital zoom cannot be used when using a
wide conversion lens.
• When there is dirt (water, oil, and
fingerprints, etc.) on the surface of the
lens, the image may be affected. Lightly
wipe the surface of the lens with a soft,
dry cloth before and after taking pictures.
• Ensure that [CONVERSION] is set to
[OFF] when not using a conversion lens.
• When using the conversion lens or
close-up lens:
– The built-in flash cannot be activated.
– If you set [CONVERSION] to [OFF], the
performance of the conversion lens or
close-up lens will not be optimal.
• When using the tele conversion lens:
–We recommend using a tripod.
– The stabilizer function may not work
sufficiently.
– The focus indication may light due to the
jitter even if the subject is not focused.
– The time required for focusing may
become longer than usual.
• If you set [CONVERSION] to [
[ ], you cannot use the built-in flash or
C
AF assist lamp. (P85)
• Read the operating instructions of the
conversion lens for details.

[CLOCK SET]

Set the date, time and display

MENU
Press [ ] to display the [REC] mode
SET
menu and select the item to set. (P76)
Change date and time. (P19)
], [ ] or