[X]:
[ASPECT RATIO] of a 4:3 TV
[Y]: [ASPECT RATIO] of a 35 mm film camera
[W]: [ASPECT RATIO] of a high-definition TV, etc.
[X]
Note
The ends of the recorded pictures may be cut at printing
•
For details on [REC] mode menu settings, refer to P19.
The camera automatically sets the optimum ISO sensitivity and shutter speed to suit the
movement of the subject and brightness of the scene to minimize the jitter of the subject.
Applicable modes:
ISOMAX
ISOMAX
[OFF]/[
]/[
]/[
400
800
• The upper limit of the ISO sensitivity can be set.
• The higher the value set for the ISO sensitivity, the more the jitter is reduced but the greater the
amount of picture noise.
Note
• Depending on the brightness and how fast the subject is moving, jitter may not be avoided.
• Movements may not be detected when a moving subject is small, when a moving subject is at
the edge of the screen or when a subject has moved at the very moment when the shutter
button was pressed fully.
• To avoid picture noise, we recommend decreasing maximum ISO sensitivity level or setting
[COLOR MODE] to [NATURAL]. (P66)
For details on [REC] mode menu settings, refer to P19.
This allows the sensitivity to light (ISO sensitivity) to be set. Setting to a higher figure
enables pictures to be taken even in dark places without the resulting pictures coming out
dark.
Applicable modes:
[AUTO]/[80]/[100]/[200]/[400]/[800]/[1600]
ISO sensitivity
Recording location
(recommended)
Shutter speed
Noise
[INTELLIGENT ISO]
·
ISOMAX
]
1600
> [SENSITIVITY]
·
When it is light (outdoors)
[Y]
check before printing.
so
80
Slow
Less
Advanced (Recording pictures)
[W]
(P101)
1600
When it is dark
Fast
Increased
VQT1W26
61