Olympus Stylus 7000 Instruction Manual page 26

Adjusting to a natural color scheme [WB]
B
CAMERA MENU
Submenu 2
The camera automatically adjusts
AUTO the white balance according to the
shooting conditions.
For shooting outdoors under a clear
5
sky
For shooting outdoors under a
3
cloudy sky
1
For shooting under tungsten lighting
For shooting under daylight
w
fl uorescent lighting (household
lighting, etc.)
For shooting under neutral
x
fl uorescent lighting (desk lamps, etc.)
For shooting under white fl uorescent
y
lighting (offi ces, etc.)
Selecting the ISO sensitivity [ISO]
B
CAMERA MENU
Although lower ISO values reduce sensitivity,
sharp images can be taken under fully lit
conditions. Larger values increase sensitivity
so that images can be taken at fast shutter
speeds even under dimly lit conditions.
However, high sensitivity introduces electronic
noise into the resulting picture, which may give
it a grainy appearance.
Submenu 2
The camera automatically adjusts the
AUTO sensitivity according to the shooting
conditions.
The camera uses a higher sensitivity
compared to [AUTO] to minimize blur
HIGH ISO AUTO
caused by a moving subject or by
camera shake.
64/100/200/400/ Set ISO sensitivity to a numerical
800/1600 value.
26 EN
WB
: K s I A
Application
ISO
: K
Application
Shooting pictures sequentially while the
shutter button is held down [DRIVE]
B
CAMERA MENU
Submenu 2
One frame is shot each time the
o
shutter button is pressed.
Take sequential shots using the focus
j and brightness (exposure and white
*1
balance) set in the fi rst frame.
The camera takes sequential shots at
c
a faster speed than in [j].
The camera takes sequential shots at
d
approximately 11 frames/sec.
The shooting speed varies depending on the settings
*1
for [A IMAGE QUALITY] (p. 25).
When set to [j], the fl ash (p.19) cannot be
set to [REDEYE]. In addition, when set to [c],
the fl ash is limited to either # or $. When set
to [d], the fl ash is fi xed to $.
When set to [c] or [d], [IMAGE SIZE] is
limited to [I] or lower, and [ISO] is fi xed to
[AUTO]. Moreover, [FINE ZOOM] (p. 26) and
[DIGITAL ZOOM] (p. 27) are not available.
When set to [j], [c], or [d], [R] (sound
recording) (p. 27) is not available.
Shooting at higher magnifi cations than
optical zoom without reducing the image
quality [FINE ZOOM]
B
CAMERA MENU
Submenu 2
Only optical zoom is used to zoom in
OFF
for shooting.
Optical zoom and image cropping
ON are combined to zoom in for shooting
(Approx. 43× (max.)).
This function will not reduce image quality
because it does not convert images with fewer
pixels into images with more pixels by adding
pixels to a cropped image.
When set to [ON], [IMAGE SIZE] is limited to
[H] or lower.
This setting is not available when [DIGITAL
ZOOM] is set to [ON].
This function is not available when [% SUPER
MACRO] (p. 20) is selected.
DRIVE
: K s
Application
FINE ZOOM
: K s I
Application