Replace The Belt Unit - Oki C8800dn User Manual

Replace the Belt Unit _____________________

The belt unit is located under the four image drums.
1. Press the cover release and open the top cover fully.
Fig1_001.eps
WARNING! If the printer has been powered on, the fuser is
HOT. This area is clearly labelled. Do not touch it.
2. Note the positions of the four image drums: Cyan (1),
Magenta (2), Yellow (3), Black (4). It is essential that
they go back in the correct order!
ID Order.eps
3. Lift each of the image drum units out of the printer.
Place them on a flat surface in a safe place away from
direct sources of heat and light.
1
C8800 User's Guide
82
2
1
2
3
4