Adjusting the Picture Size and Position
Use the lens shift dial, the adjustable tilt foot lever, the zoom lever and the focus lever to adjust the picture size and
position.
In this chapter drawings and cables are omitted for clarity.
Adjusting the vertical position of a projected image
[Lens shift]
Finely adjusting the size of an image
[Zoom lever]
Adjusting the left and right tilt of an image
[Rear foot]
NOTE*1: Adjust the throw angle (the height of an image) when the image position is higher than the lens shift adjustable range.
2. Projecting an Image (Basic Operation)
Adjusting the focus
[Focus lever]
(→ page 18)
Adjusting the throw angle (the height of an image)
[Tilt foot] *¹
(→ page 20)
Adjusting the keystone correction
[Keystone]
(→ page 21)
17
(→ page 19)
(→ page 21)
(→ page 22)