NEC NP-P350W User Manual page 175

TIP:
Uninstalling Software Program
Preparation:
Exit the software program before uninstalling. To uninstall the software program, the Windows user account must have
"Administrator" privilege (Windows 7 and Windows Vista) or "Computer Administrator" privilege (Windows XP).
• For Windows 7/Windows Vista
1 Click "Start" and then "Control Panel".
The Control Panel window will be displayed.
2 Click "Uninstall a program" under "Programs"
The "Programs and Features" window will be displayed.
3 Select the software program and click it.
4 Click "Uninstall/Change" or "Uninstall".
• When the "User Account Control" windows is displayed, click "Continue".
Follow the instructions on the screens to complete the uninstallation.
• For Windows XP
1 Click "Start" and then "Control Panel".
The Control Panel window will be displayed.
2 Double-click "Add / Remove Programs".
The Add / Remove Programs window will be displayed.
3 Click the software program from the list and then click "Remove".
Follow the instructions on the screens to complete the uninstallation.
Connect the projector to the computer
1 Use the supplied computer cable (VGA) to connect the COMPUTER 1 IN connector of the projector directly
with the monitor output connector of the computer.
2 Connect the supplied power cord to the AC IN of the projector and the wall outlet.
The projector is in the standby condition.
TIP:
• When Virtual Remote Tool starts for the first time, "Easy Setup" window will be displayed to navigate your connections.
COMPUTER 1 IN
AC Input
Supplied computer cable (VGA)
Power cord (supplied)
157
8. User Supportware
→ To wall outlet