Recording Videos - Mio DigiWalker C720T User Manual

Item
Reset
To leave the Settings screen, tap
stored and retained until you change them again.

5.5 Recording Videos

1. Insert a storage card if you want to store your videos to it. Make sure that the
correct storage location is specified. (See Section 5.6 for information.)
2. Start the Camera program (as described in 5.1). The program will be in the
Camera mode by default. Tap
indicated by the
3. If you need to change the settings, tap
4. Aim the camera lens at your target. You can use the control button on the right
to adjust the camera lens (details provided in following section).
5. To begin recording, fully press the Camera button.
The system will play a beep sound and the red icon
screen to indicate that recording is in progress. The number to the side shows
the length of video recorded so far (e.g.
limited to a length of 15 seconds. (You can change this in Video Settings.)
6. To manually end the recording, press the Camera button again. The system
will play a beep sound to indicate that the recording has been stopped.
Name
Restore the Camera settings to their factory defaults.
on the screen.
Description
. Any changes that you have made will be
to switch to the Video mode. This will be
. (See Section 5.6 for information.)
). By default, videos are
will appear on the
43