Storing Geographic Coordinates
Apart from taking photos, the Camera program also offers GPS Stamp function.
This will store the geographic coordinates of your location as you take a photo. In
the future you can use the MioMap navigation program to directly navigate to the
shooting location of the photo.
1. Start the Camera program (as described in 6.1). If the GPS Stamp function is
not enabled, tap
2. The
icon will appear in the lower left corner of the screen to indicate that
the program has activated its GPS port and is now searching for GPS
satellites.
NOTE: If a GPS fix can't be achieved within 2 minutes the
You can tap this icon to try to connect again.
3. After a GPS fix, your current coordinates will show at the bottom of the
screen. To take photos, follow the instructions as described in the "Taking a
Photo" section.
4. Once the GPS Stamp function is enabled, it will remain active until you turn it
off.
to enable it.
icon will have an
X
symbol.
41