Table of Contents
Advertisement
Picture Controls
Adjusting Picture Settings
Using OSD Menu
.
Various picture adjustments can be set using the Picture Adjustment OSD menu.
Press the
on the front panel or remote
control. Use
option from the menu and press
confirm selection.
Various picture settings are available from the
PICTURE menu. Use
option that you wish to adjust and press
to confirm selection.
Notes:
!
H-Position, H-Size, V-Position, V-Size
adjustments are only available in RGB,
DVI, and Component input modes greater
than 480i.
!
When using Component 1 and Component
2 inputs with 480i signals, H-Size, H-
Position, V-Position, V-Size settings are
not available.
To restore picture settings to factory
!
default, simply press the RECALL key from
the remote control when the PICTURE
menu is displayed.
A small display window appears upon selecting
the option to change. Use
setting. As you change the setting, changes in
the picture are immediately reflected in the
video picture. After achieving desired setting,
press
key to confirm setting and return to
previous menu.
Explanation of Various Picture Control Settings
Explanation of each available picture control settings are listed in the table below.
CONTRAST
Adjust Contrast to increase or decrease the level of white in the video picture. Increasing contrast
will make white areas of the video picture brighter. Contrast works in conjuction with Brightness.
34
to select the PICTURE
key to
to select the
key
to change the
Advertisement
Table of Contents
