Volume Adjustment - Maxent MX-27X1 Owner's Manual

Using Direct Input Selection Keys
If you prefer not to cycle thru all available inputs, you can use the Direct Input Selection keys located towards
the bottom of the remote control.
Simply select the input that you would like to
switch to and press the Direct Input Selection
key for that input.
Note:
! TV2 and DVI2 direct input keys are not
available.

Volume Adjustment

Using Front Panel or Remote Control
To turn up sound volume, press VOLUME + on
either the front panel of monitor or on the
remote control.
To turn down sound volume, press VOLUME -
on either the front panel of monitor or on the
remote control.
Note:
! If the monitor's built-in speakers are turned
off, then volume controls will not affect
volume generated by the built-in speaker.
Using MUTE
If you would like to silence the volume on a
temporary basis, simply press the
silence the volume. When the monitors volume
is muted, the monitor will display MUTE on the
upper right corner of the screen.
To disengage the mute mode, simply press the
key again or the volume buttons.
Note:
! If the monitor's built-in speakers are turned
off, then volume controls will not affect
volume generated by the built-in speaker.
key to
Basic Operations
Direct Input
Selection Keys
VOLUME +/-
MUTE
27