Changing Aspect Ratios
Using Remote Control
All widescreen viewing modes are available by
pressing the
repeatedly will cycle through all six modes:
Note:
!
Under RGB and DVI input modes, only 16:9
WIDE and 4:3 Normal modes are available.
!
When displaying 480p, 1080i, and 720p
signals under component video input, Zoom
1, Zoom 2, and Zoom 3 modes are not
available.
Using OSD Menu
Access the OSD menu, select PICTURE
submenu. Use
FORMAT. Press
The FORMAT window is displayed. Use
keys to select the desired format mode. As
you select each mode, the screen changes.
Press
key to confirm selection.
Note:
!
Under RGB and DVI input modes, only 16:9
WIDE and 4:3 Normal modes are available.
!
When displaying 480p, 1080i, and 720p
signals under component video input, Zoom
1, Zoom 2, and Zoom 3 modes are not
available.
key. Pressing this key
keys to highlight
key to confirm selection.
Basic Operations
Wide
Key
31