Marantz BD8002 User Manual page 40

ENGLISH FRANÇAIS DEUTSCH NEDERLANDS
Function Setup
Menu Setting items
Channel Level Test Tone:
Tests or sets the "Test Tone" is the test
volume for each tone which can be
speaker. output from the
speakers so that you
can adjust the volume
for each speaker.
Front Lch
Center
Front Rch
Surround Rch
Surround Back Rch
Surround Back Lch
Surround Lch
Subwoofer
SW + 10 dB
(Not available for HDMI)
ESPAÑOL ITALIANO SVENSKA
Options Descriptions
Off* Select "Off" to deactivate
the "Test Tone" feature.
Select "Manual", then
press [ENTER] to manually
Manual
set the volume for the
desired speaker.
Select "Auto",then press
Auto
[ENTER] to automatically
output the test tone from
each speaker.
0 dB to -12 dB If you have selected
(0 dB*) "Manual" in "Test Tone",
select the desired speaker
0 dB to -12 dB
to set and adjust the
(0 dB*)
volume for the selected
0 dB to -12 dB
speaker.
(0 dB*)
If you have selected
0 dB to -12 dB
"Auto" in "Test Tone", test
(0 dB*)
tone will be output
automatically in order.
0 dB to -12 dB
Adjust the volume of the
(0 dB*)
speaker that output the
0 dB to -12 dB
test tone.
(0 dB*)
0 dB to -12 dB
(0 dB*)
0 dB to -12 dB
(0 dB*)
On/Off* Set "On" to increases the
volume level that is output
from the subwoofer by 10
dB.
ENGLISH
Menu Setting items
Delay Time Distance
This is a parameter
for optimizing the
timing at which the
sound is output from
the speakers
according to their
Front Lch
distance from the
listening position.
Front Rch
Center
Surround Lch
Surround Rch
Surround Back Lch
Surround Back Rch
Subwoofer
Default
• Settings with (*) are the default.
• For HDMI, "None" and "Off" options for "Speaker Configuration" are not available.
• For "Delay Time", the difference among the value of the each speaker cannot exceed 4.5m (15ft).
36
Function Setup
Options Descriptions
Feet Set the desired measure
system. This measure
system will be used for
"Delay Time" setting. Press
Meters*
[ENTER] to switch the
setting.
0m - 18m (3.6m*) Select the distance from
the listening point to the
(0ft - 60ft (12ft))
speaker to get the ideal
0m - 18m (3.6m*)
delay time.
(0ft - 60ft (12ft))
0m - 18m (3.6m*)
(0ft - 60ft (12ft))
0m - 18m (3.0m*)
(0ft - 60ft (10ft))
0m - 18m (3.0m*)
(0ft - 60ft (10ft))
0m - 18m (3.0m*)
(0ft - 60ft (10ft))
0m - 18m (3.0m*)
(0ft - 60ft (10ft))
0m - 18m (3.6m*)
(0ft - 60ft (12ft))
Select "Default", then press
[ENTER], to reset the
"Delay Time" setting to the
default.