M S-7235 M ainboard
Re-Call VGA BIOS from S3
Selecting [Enabled] allows BIOS to call VGA BIOS to initialize the VGA card when
system wakes up (resumes) from S3 sleep state. The system resume time is short-
ened when you disable the function, but system will need an AGP driver to initialize
the VGA card. Therefore, if the AGP driver of the card does not support the initializa-
tion feature, the display may work abnormally or not function after resuming from S3.
Suspend Time Out (M inute)
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off.
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[Power Off]
[Suspend]
Wakeup Event Setup
Press <Enter> to enter sub-menu.
Resume By PCIE Device
The item specifies how the system will be awakened from power saving mode
when input signal of the PCI Express is detected
Resume By PCI Device
The item specifies how the system will be awakened from power saving mode
when input signal of the PCI is detected
Resume From S3 By USB Device
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state.
Resume by RTC Alarm
This is used to enable or disable the feature of booting up the system on a
scheduled time/date from the S3, S4, and S5 power off state.
Date (of M onth) Alarm
The field specifies the date for Resume by RTC Alarm.
Time (hh:mm:ss) Alarm
The field specifies the time for Resume by RTC Alarm. Format is <hour><minute>
<second>.
Resume By PS/2 Keyboard
This setting only works Resume By PS/2 Keyboard is set to [Hot Key]. This
setting specifies how the system will be awakened from power saving mode
when input signal of the keyboard is detected.
3-16
The power button functions as a normal power-on/-off button.
W hen you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.