Cpu, Heatsink, And Heat Pipe Cooler - MSI MS-9218 User Manual

MS-9218 1U Rackmount Server

CPU, Heatsink, and Heat Pipe Cooler

1. Locate the CPU socket.
3. Open the load plate.
4. After confirming the CPU direction
(indicated below with red circles)
for correct mating, put down the
CPU in the socket housing frame.
Be sure to grasp on the edge of
the CPU base. Note that the align-
ment keys are matched.
5. Visually inspect if the CPU is seated well into the socket. If not, take out the CPU
with pure vertical motion and reinstall.
6. Cover the load plate onto the package.
7. Press down the load lever lightly onto the load plate and then secure the lever
with the hook under the retention tab.
3-4
2. Raise the load lever up to its full extent.