The mainboard provides connectors to connect to FDD, IDE HDD, case, LAN,
USB Ports and CPU/System/NB FAN.
Floppy Disk Drive Connector: FDD1
The mainboard provides a standard floppy disk drive connector that supports
360K, 720K, 1.2M, 1.44M and 2.88M floppy disk types.
Fan Power Connectors: CFAN1 / SFAN1 / NBFAN1
The CFAN1 (processor fan), SFAN1 (system fan) and NBFAN1 (NorthBridge
Chipset fan) support system cooling fan with +12V. It supports three-pin head
connector. When connecting the wire to the connectors, always take note that the
red wire is the positive and should be connected to the +12V, the black wire is
Ground and should be connected to GND. If the mainboard has a System Hardware
Monitor chipset on-board, you must use a specially designed fan with speed sensor
to take advantage of the CPU fan control.
SENSOR
+12V
GND
CFAN1
MSI Reminds You...
1. Always consult the vendors for proper CPU cooling fan.
2. Please refer to the recommended CPU fans at AMD
3. CFAN1 supports the fan control. You can install Core Center utility
that will automatically control the CPU fan speed according to the
actual CPU temperature.
Connectors
FDD1
SENSOR
+12V
GND
SFAN1
Hardware Setup
GND
+12V
NC
NBFAN1
®
official website.
2-13