Testing The Connected Speakers - MSI KT4A-V User Manual

MS-6712 ATX Mainboard

Testing the Connected Speakers

To ensure that 4- or 6-channel audio operation works properly, you may
need to test each connected speaker to make sure every speaker work properly.
If any speaker fails to sound, then check whether the cable is inserted firmly
to the connector or replace the bad speakers with good ones.
Testing Each Speaker
1. Click the audio icon
the screen.
2. Click the Speaker Test tab.
3. The following window appears. Select the speaker which you want to test
by clicking it.
Front Left
Rear Left
MSI Reminds You...
6 speakers appear on the "Speaker Test" window only when
you select "6-Channel Mode" in the "No. of Speakers" column.
If you select "4-Channel Mode", only 4 speakers appear on the
window.
A-14
from the window tray at the lower-right corner of
Center
Subwoofer
Front Right
Rear Right