Full Screen LOGO Show
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled]
[Disabled]
Hard Disk Boot Priority
Press <Enter> to enter the sub-menu. Then you may use the arrow keys (
select the desired device, then press <+>, <-> or <PageUp>, <PageDown> key to
move it up/down in this hard disk boot priority list.
Virus Warning
The item is to set the Virus Warning feature for IDE Hard Disk boot sector protection.
If the function is enabled and any attempt to write data into this area is made, BIOS
will display a warning message on screen and beep. Settings: [Disabled] and [Enabled].
Internal Cache
The item allows you to turn on or off CPU's internal (L1) cache. Settings: [Enabled]
and [Disabled].
External Cache
The item allows you to turn on or off CPU's external (L2) cache. Settings: [Enabled]
and [Disabled].
Advanced BIOS Features
Shows a still image (logo) on the full screen at boot.
Shows the POST messages at boot.
BIOS Setup
to
3 - 7