Table of Contents
Advertisement
MS-6580 ATX Mainboard
Using 2-, 4- & 6- Channel Audio Function
After installing the audio driver, you are able to use the 4-/6-channel
audio feature now. To enable 4- or 6-channel audio operation, first connect 4 or
6 speakers to the appropriate audio connectors, and then select 4- or 6-channel
audio setting in the software utility.
There are two ways to utilize the function and connect the speakers to
your computer:
n Using the optional S-Bracket
If your motherboard supports S-Bracket and you have installed S-
Bracket in the computer, you can connect two speakers to back
panel's Line-Out connector, and the rest of speakers to S-Bracket.
n Using the back panel only
If you do not have a S-Bracket, you can connect all speakers to the
audio connectors on the back panel.
Using the Optional S-Bracket
S-Bracket integrates the SPDIF (Sony & Philips Digital Interface) and
analog LINE OUT connectors together. With this optional accessory, users
will be able to decide either analog or digital audio output when applying the
speakers to the connectors.
Read the following instructions to have the Multi-Channel Audio Function
mode properly set in the software configuration, and then have your speakers
correctly connected to the S-Bracket.
MSI Reminds You...
If you intend to use the S-Bracket, select Default Phonejack in the
Speaker Configuration tab.
A-12
Hide quick links:
Advertisement
Table of Contents
