Speaker Configuration
In this tab, you can easily configure your multi-channel audio function
and speakers.
1. Select a desired multi-channel operation from Number of Speakers.
a. Headphone for the common headphone
b. 2-Channel Mode for Stereo-Speaker Output
c. 4-Channel Mode for 4-Speaker Output
d. 6-Channel Mode for 5.1-Speaker Output
2. Select or clear the Default Phonejack check box to decide which
audio devices you wish to use for audio outputs.
NOTE: If you intend to use the S-Bracket, select Default Phonejack.
3. The audio output selections listed under S-Bracket (OPTION) are
available only when S-Bracket is connected to the mainboard.
4. Then click OK to apply the configuration.
1
Using Audio Function
2
3
A-7