Stop Chart; Surface Clarity - Lowrance LCX-112C Operation Instructions Manual

Stop Chart

If you are running multiple units on a boat or using this unit in a car, there
are times when you may want to turn off the sonar. This command turns off
the sonar and stops the chart from scrolling. Sonar restarts automatically
each time you turn on your unit.
Press |↓ to | | .
MENU S C ENT EXIT
TOP HART
To turn on sonar and start the chart scrolling again, repeat the above step.
Sonar Menu with Stop Chart command selected.

Surface Clarity

The markings extending downward from the zero line on the chart are
called "surface clutter." Wave action, boat wakes, temperature
inversion and more cause these markings.
The surface clarity control reduces or eliminates surface clutter signals
from the display. It does this by changing the sensitivity of the receiver,
decreasing it near the surface and gradually increasing it as the depth
increases.
There are three levels of surface clarity available: low, medium, or high.
It can also be turned off. The default level is off.
To adjust the Surface Clarity level:
1. From the Sonar Page, press |↓ to | .
MENU S F ENT
ONAR EATURES
91