LiteOn LVW-5115GHC+ User Manual page 57

Audio
Some pre-recorded DVD discs have more than one
audio language. The language initially selected for
playback will be the one you select when you fi rst
set up the DVD recorder. However, you can change
the audio language of the disc at any time.
Setting Audio Output (p.20)
1
Press  to select 'Audio', then press
ENTER to go to the sub-menu.
2
Press  to select an audio language, then
press ENTER.
3
Press NAVI. again or repeatedly press to exit
the Navigation menu.
Note
• This function will be disabled, if not available.
• When VCD/SVCD is selected for playback,
audio options will be: Normal, Left and Right.
Angle
Some pre-recorded DVD discs contains scenes
which have been shot from different camera angles.
You can choose to view these camera angles during
playback.
1
Press  to select 'Angle', then press
ENTER to go to the sub-menu.
2
Press  to select a camera angle, then press
ENTER.
Playback_02_06
3
Press NAVI. again or repeatedly press to exit
the Navigation menu.
Note
• This function will be disabled, if not available.
Information
During playback, you can select to show the disc
information on the top of the screen or to hide it.
1
Press  to select 'Information', then press
ENTER to go to the sub-menu.
2
Press  to select 'On' or 'Off', then press
ENTER.
Playback_02_07
If you select 'On', disc information will be displayed on the
top of the screen.
3
Press NAVI. again or repeatedly pressto exit
the Navigation menu.
Note
• Different categories of information will be shown
depending on the media type.
54