Started_SystemSetup_05_01
4
Press to select 'Component' or 'Progres-
sive', then press ENTER.
Started_SystemSetup_05_02
5
When completed, pressto return to the main
menu.
6
Press or SETUP to completely exit the
Setup menu.
About 'Progressive Scan'
'Progressive Scan' mode differs from the 'Inter-
laced Scan' mode in how a video image is updated.
In 'Progressive Scan' mode, scan lines for an image
are refreshed in every pass and by a sequential
order. In the 'Interlaced Scan' mode, image is
updated by alternating sets of odd and even scan
lines.
Progressive Scan Mode:
Interlaced Scan Mode
Note
• If you accidentally set 'Progressive' as the video
output mode when the DVD recorder is not
connected to a progressive-scan-compatible
TV, you may lose the video signal on your TV
instantly. To recover the problem, press (right
direction button), 5, 0, 2, 0, on remote control,
then press ENTER. In about 8 seconds, this
DVD recorder's TV output will be restored to
default setting.
Setting Audio Output
1
Press SETUP to display the Setup menu.
2
Press to select 'Audio', then press
ENTER.
3
If you would like to change digital audio
Line 1
output mode, press to select 'Digital
Line 2
Output', then press ENTER.
Line 3
Line 4
If you would like to change the audio output
Line 5
mode for the MPEG fi les, press to select
Line 6
'MPEG', then press ENTER.
Line 7
etc
20
Line 1
Line 3
Line 5
Line 7
etc
Started_SystemSetup_06_01
Line 2
Line 4
Line 6