LiteOn LVW-5115GHC+ User Manual page 50

Liteon lvw-5115ghc+: user guide
Table of Contents

Advertisement

Why This Happened
Why is my preset program not completely
recorded?
Incomplete recording may be resulted from:
1. Insuffi cient disc space
If there is not enough space on the disc, your preset
program can only be partially recorded depending
on the amount of capacity available.
2. Overlapped Timer Program settings
The unfi nished recording may occur when time
settings of two Timer Programs overlap. Under the
circumstances, the DVD recorder stops recording
the earlier program at the start time of the later
program.
Setting Timer Program
(VCR Plus+
Mode)
®
Before you start...
1.
Check if your model features the VCR Plus+ ®
support.
Model Comparison Chart (p.4)
There are two ways to set up timer programs using
VCR Plus+
system. For more information on how
®
to set up the system, please see ‘Setting up the
VCR Plus+
System’.
®
Path 1:
1. Press VCR Plus+ button to display the VCR
Plus+ menu.
Path 2:
1. Press TIMER to display the Timer Record
menu.
2. Press ENTER to start new setting, or press 
to select a previous setting which you would like
to modify, then press ENTER.
3. Press  to go to the ‘VCR Plus+’
button, then press ENTER to display the VCR
Plus+ setup menu.
1
Press number buttons (0-9) or to
enter the PlusCode number, then press EN-
TER.
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Details of the preset program will be displayed.
2
The ‘Preset Channel’ dialogue box will be
displayed, if the DVD recorder fails to fi nd
information of a corresponding channel. Press
or the number buttons (0-9) to enter
the channel number shown on your TV, then
press ENTER.
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Timer_03_01
Note
• To make use of the VCR Plus+
system for timer
®
recording, you need to match the GCNs (guide
channel numbers) used by the VCR Plus+
®
system with the channel numbers shown on
your TV, so that the relevant information can be
correctly assigned to the programs you would
like to record.
3
Press ENTER, then to select a record-
ing frequency (Once/Daily/Weekly). When
completed, press ENTER to confi rm your
selection.
4
Press ENTER, then to select a recording
mode. When completed, press ENTER to
confi rm your selection.
Page 47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents