Started_SystemSetup_04_01
4
Press to activate or disable the function,
then press ENTER.
5
If you choose to activate the function, a
dialogue box titled ‘Time Zone’ will appear.
Press to select a time zone appropriate
to the area where you are situated, then press
ENTER.
Started_SystemSetup_04_03
6
A dialogue box titled ‘Daylight Saving’ will
then appear. Press to make selection suit-
able for your time zone, then press ENTER.
Started_SystemSetup_04_04
7
The DVD recorder will start scanning the clock
signal submitted by the fi rst detected channel.
Started_SystemSetup_04_06
8
If the scanning is successful, a channel time
will be displayed. Press to accept or
discard the setting, then press ENTER.
Started_SystemSetup_04_05
9
If the scanning is unsuccessful, you can manu-
ally adjust the source channel, and then begin
the process again.
Started_SystemSetup_04_06
10
When completed, pressto return to the main
menu.
11
Press or SETUP to completely exit the
Setup menu.
Setting Video Output
1
Press SETUP to display the Setup menu.
2
Press to select ‘System’, then press
ENTER.
3
Press to select ‘Video Output’, then press
ENTER.
Page 19