Using An External Sd/Mmc Memory Card - Durabrand MP-356 Operating Instructions Manual

3-6. Using an External SD/MMC Memory Card

1. Turn the player off. Open the back cover, refer to diagram below.
2. Confirm the card is SD/MMC type and insert the card as indicated in the diagram
below and you will hear a click, then close the battery cover box.
3. Turn the player on. It will play the songs on the SD/MMC card automatically, the
memory icon "CARD" will show in the display (card play).
4. If you want to listen to the music on the built-in flash memory, stop the playback,
press the MODE button (M) repeatedly to select the flash memory, then press the
PLAY/PAUSE
memory automatically.
5. To remove the SD/MMC memory card, turn off the set first, then open the battery
cover, and push the SD/MMC card, the card will pop out.
NOTE 1: The external SD/MMC card requires a fully charged or fresh battery to operate,
so please change to a new battery if you can't power on when you are using
the external SD/MMC card.
NOTE 2: Be sure to turn off the MP3 player before inserting or removing the SD/MMC
card. If your set is on, it may cause some data to be lost or the set to freeze
or become inoperative. If this should happen, please take out the battery for
1 minute, then replace it and restart the MP3 player.
button to confirm. The player will play the songs on the flash
17
(Optional - not included)
IB-MP356-WC-E-052806