Installing Software Driver And Utilities - Durabrand MP-356 Operating Instructions Manual

2-2. Installing Software Driver
1 Turn on your computer and insert the Driver Setup disc to the CD-ROM drive.
2 The computer screen will display the welcome page. The Driver Setup disc contains:
•
Driver Setup
•
Firmware Upgrade
•
Windows Media Player 9.0
•
Adobe PDF Reader
•
Operating Instructions (in PDF form)
If you have a newer system like Windows
XP or Me, go to step 5.
3 Select "Driver Setup", then install the
driver as the instructions.
NOTE: No driver is required for Windows Me, XP, 2000 or Mac OS X 10.2.6 or above.
4 Firmware Upgrade.
WARNING: Use firmware upgrade ONLY if the MP3 player cannot operate properly
due to damaged/missing system software.
a. Connect the MP3 player to your computer (see next page).
NOTE: Before you perform firmware upgrade, please backup the data on the
flash memory. The data in the flash memory will be erased.
b. Click the "Firmware Upgrade" button, follow the software upgrade instructions. Do
not disconnect the MP3 player during upgrade.
c. Safely disconnect the MP3 player from the computer after upgrade (see page 13).
5 Install Windows Media Player 9.0.
If you have not installed Windows Media Player 9.0 (or later), you will be prompted to
install or update your current version. (Details of Windows Media Player 9.0 on Pages
20-22).
6 Installation is complete!
You are now ready to connect the audio player to your computer.
To Uninstall the Win98SE Driver:
Run "1. Start 2. MP-356 MP3 Audio Player
(For Windows 98SE users only)
3. Uninstall".
9
and Utilities
IB-MP356-WC-E-052806