Table 22. Removal steps of LCD unit (continued)
When installing
• Make sure that you route the cables firmly and tape up in the proper positions as shown in the figure above.
• When you route the cables, make sure that they are not subjected to any tension. Tension could cause the cables
to be damaged by the cable guides, or a wire to be broken.
1120 DC-in sub card
For access, remove these FRUs in order:
•
"1010 Battery pack" on page 66
•
"1080 Keyboard" on page 78
• "1100 Palm rest with fingerprint reader, smart card reader, and speaker" on page 83
•
"1110 LCD unit" on page 87
.
Chapter 8
Removing and replacing a FRU
89