1120 System Board Assembly And Vga Sub Card - Lenovo ThinkPad L330 Hardware Maintenance Manual

When installing: Place the microprocessor above the microprocessor socket, and then rotate the head of
the screw in the direction shown by the arrow

1120 System board assembly and VGA sub card

Important notices for handling the system board
When handling the system board, bear the following in mind:
• The system board has an accelerometer, which can be broken if several thousands of G-forces are applied.
Note: Dropping a system board from a height of as little as six inches so that it falls flat on a hard bench can subject
the accelerometer to as much as 6,000 G's of shock.
• Be careful not to drop the system board on a bench top that has a hard surface, such as metal, wood, or composite.
• If a system board is dropped, be sure to document the drop in any reject report, and replace the system board.
• Avoid rough handling of any kind.
• At every point in the process, be sure not to drop or stack the system board.
• If you put a system board down, be sure to put it only on a padded surface such as an ESD mat or a corrugated
conductive surface.
For access, remove these FRUs in order:
• "1010 Battery pack" on page 56
• "1020 Bottom cover" on page 57
• "1040 Hard disk drive or solid-state drive" on page 59
• "1050 PCI Express Mini Card for wireless LAN" on page 61
• "1060 PCI Express Half Mini Card for wireless WAN or mSATA solid-state drive" on page 63
• "1080 Keyboard" on page 68
• "1090 Keyboard bezel assembly and power button sub card" on page 70
• "1100 Thermal fan assembly " on page 73
• "1110 Microprocessor" on page 75
76
Hardware Maintenance Manual
2
1
3
to secure the microprocessor.
3