Kyocera KM-8030 Operation Manual page 14

English
3
4
5
6
1-10
Load the originals in the Document
Processor, or one at a time on the Platen.
NOTE:
Refer to the Operation Guide
for your copier for Document Processor
and Platen specifications.
Select other features as required and press Start.
Copies will be stapled and ejected onto Tray
A, face down.
If Tray A reaches its maximum capacity, a
message displays. Remove all copies from
Tray A to continue.
NOTE:
The maximum number of copies that can be stored on Tray A differs
depending on the size of copy paper being used. For further information refer to
Tray Capacity on page 1-32.
On completion of the job, remove the copies.
Non-Sort Mode
Use this mode when sorting or grouping are
not required.
ALWAYS use Non-Sort Mode when copying
onto transparencies or other special
material or paper.
DF-650, MT-1(A), BF-1(A), PH-4A AND PH-4C OPERATION GUIDE
A
B
C
D
E
A
B
C
D
E